close cookiebox

Cookies on the Schlüter-Website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we´ll assume that you are happy to recieve all cookies on our Schlüter Website. However, if you would like to, you can change your cookie settings at any time.


Schlüter-BEKOTEC-EN (content)
Schlüter-BEKOTEC-EN is a studded screed panel made of polystyrene, which is designed for the attachment of the Schlüter-BEKOTEC-THERM-HR heating pipes, with a diameter of 16 mm. The panels are grooved for optimal joining. The heating pipes are attached in the desired spacing between the cutback studs, which are arranged in a regular spacing pattern of 75 mm. Conventional screed – CT-C25-F4 (ZE 20) or CA-C25-F4 (AE 20) – is installed above the studs with a thickness of at least 8 mm and at most 25 mm.

Schlüter-BEKOTEC-EN/P consists of polystyrene (EPS 033 DEO), white, without foil coating and is most suited for conventional cement screeds.

EN/P = screed panel without foil, e.g. conventional cementitious screeds.
1 panel (0.8 m2) = smallest delivery unit.

Schlüter-BEKOTEC-EN (Content 2)
Schlüter-BEKOTEC-EN/PF is made of polystyrene (EPS 033 DEO) with an orange sheet coating and is therefore especially suited for flowing screeds (e.g. gypsum screeds).

Technical Data:
Installation width: 75-150-225-300 mm
Material classification: B2 pursuant to DIN 4102
Heat conductor group: 033 (0.033 W/mK)
U value: 1.650 W/m2K
Thermal resistivity: 0.606 m2K/W

The uncoupling mat Schlüter-DITRA must be adhered over the screed prior to the installation of ceramic tiles or natural stone. The mat can be installed as soon as the screed is ready to bear weight (gypsum screeds: < 2% residual moisture).
Please observe the instructions of our product data sheets 6.1 and 9.1.

EN/PF = screed panel with sheet coating, suitable for flowing screeds, e.g. gypsum screeds
1 panel (0.8 m2) = smallest supplied unit.

How you got here